Product Description
Product Instructions
Character of portable toilet
* High – density polyethylene construction.
* Completely self-contained .
* No external connections required .
* 10L or 20L capacity / waste holding tank .
* Secure clamps and latches.
* Easy to carry ,easy to clean .
* All parts are easily replaced .
* Selectable bracket can increase the height .
* 10L : 410 X 355 X 310mm 20L : 410 X 355 X 420 mm

Product Feature
1. Preface
The development of economy and improvement of society are both based on human civilization. In the meantime, the civilization of human life will directly depend on sanitary facilities. Just for this improvement, we think of the portable toilet involving human idea in our design and considering the needs of the people different in various different lines, ages and healthy situation thoroughly. Our portable toilet will surely solve trouble in your life and bring you pleasant mood and happy life .
Comfort*Convenience * Environment Protection
2. Brief introduction
Before using our portable toilet, kindly have the idea for its character, structure and components for proper use.
2. Brief introduction
Before using our portable toilet, kindly have the idea for its character, structure and components for proper use.
(1) Character of portable toilet:
* High-density polyethylene construction.
* Completely self-contained for waste.
* No external connections required.
* Secure clamps and latches.
* All parts are easily replaced by end users.
* 10L or 20L capacity/waste holding tank.
* Easy to carry, easy to clean.
* Fits for most compact spaces 10L : 410 X 355 X 310 mm 20L : 410 X 355 X420mm . ( Figure 1 10L dimension for your reference )
(2) Structure of portable toilet
* Adult-sized seat and lid are sturdy, thick wall construction, strong enough to stand on.
(Figure 2)


* Always flushes with clean water, no water is recirculated.
* Completely self-contained. No external water or power connections required.
* Fresh water capacity provides up to 50 flushes.
* Attractive matte finish conceals scratches; clean by scrubbing without damage .
(Figure 3)

* Double sealed drain valve protects against leakage and odors.
(Figure 4)

* Heavy duty, corrosion resistant side latches lock tanks together.
(Figure 5)

* 10L or 20L detached waste holding tank is easy to empty.
* Both tanks are one-piece construction, no seams.
(Figure 6)

* Empty waste easily with no any tools.
(Figure 7)

* Selectable bracket can increase the height..
(Figure 8)

(3) The components sketch map of portable toilet
Sketch map:(Figure 9)

Product Specification/Models
3. Use and operation
The specific use and operation of our portable toilet will have some difference according to the application and preference of different people. If any question, please contact local agent or our customer service department directly. Our recommended using procedure, which is also the most effective procedure, is mentioned below.
(1) Operation
* Open the cap of fresh water holding tank, fill the tank with fresh water just below the neck mouth, and then tighten the cap up.
* Pull out slide valve before use.
* Depress pump one or more times to rinse bowl after use, clean with brush if necessary. (Figure 10)

* Close slide valve by pushing fully for next use.
(2) Emptying waste holding tank
* The waste holding tank has 10L or 20L capacity, It should be emptied when contents reach approximately 2 cm below slide valve. (Suggestion: add water in fresh water holding tank fully, the waste holding tank should be emptied when you cannot press out water. Usually empting waste holding tank and add fresh water is operated in the meantime.)
* Make sure that the slide valve is pushed in completely before separating waste holding tank, and then break off the latches on both sides, hold fresh water tank with both hands and move it from the above of waste holding tank. Do not disassemble the slide valve usually. (Figure 11).
* Carry waste holding tank to the permanent toilet facility.
* When removing the cap, make sure that waste holding tank in vertical position. (Figure 12)
* Atmospheric pressure and temperature changes may cause pressure build up in lower holding tank. Caution should be taken when first opening slide valve or opening waste holding tank cap. (Before opening waste holding tank for emptying, It is better for you to place waste holding tank in horizontal position, open slide valve and then close it for releasing internal pressure.)
* To avoid splashing, slowly pour contents into permanent toilet facility.
* Add fresh water, replace cap and shake tank to rinse .
* Remove cap and pour rinse water into permanent toilet facility. (You can make determination by yourself if you would like to add powder or liquid deodorant
------ apply deodorant according to instructions strictly). Check the sealed circle be in the original place and replace cap firmly for assembling later.

(3) Assembling of portable toilet
* Place waste holding tank in horizontal position and make sure that the sealed circle in proper position, hold the fresh water holding tank with both hands, unfold the latches outward and place the fresh water limber hole to the center of waste holding tank’s slide valve. Make sure of good assembling.
* First lock the latches on the groove of waste holding tank, and then hitch the holding tank body, push inward to proper position.
* Open the cap of fresh water holding tank and add fresh water to the below of fresh water tank mouth, and then tight it up .
Caution :
Do not add deodorant to top fresh water tank .

4. B type bracket assembling instructions
Our 10L portable toilet is supplied in: Type A and Type B. Type B is supplied with an additional bracket for height extending. The bracket is 125mm in height .And the height of our portable toilet with bracket corresponds to traditional ceramic toilet’s.
Type B is suitable for the aged or disable people to use in immobile places .The 20L portable toilet need not bracket .
(1) Please kindly see assembling sketch map.

(Figure 13)

(2) Check the accessories: M6 x 35 hex key, 8 pieces of bolt, 1 piece of M6 hex key wrench.
(3) U shape bracket and the U shape earmuffs on the U shape beam must face outward completely. These 4 earmuffs will coincide with the 4 corresponding position on the bottom of waste holding tank so as to form firm supporting structure.
(4) Align the U shape bracket and the U shape screw thread hole, plug in M6 bolt, place the nut, and then tighten up the bolt with wrench in diagonal order.
(5) The length and width of bracket should be coincide with the portable toilet’s. Assemble the portable toilet well, then can be used easily .
(6) The 4 feet of our bracket have flexible cushion, you can use it on the floor or carpet.
5.Caution for safety
(1) Handle with care, no inversion, no rough handling.
(2) Avoid long time direct sunlight .
(3) Avoid high temperature (over 60℃).
(4) Make sure of having enough water in fresh water holding tank before use.
(5)Do not lean on the back cover with the body when using, avoiding being hurt.
(6)Do not lacerate the body of the toilet with spiculate object.
(7)Clean the waste holding tank timely, the waste holding tank must be cleaned when no fresh water can be pressed out from fresh water holding tank.
(8)Any brand tank deodorant can be used (Strictly according to deodorant
instructions).
(9) Assemble brackets according to the instructions to make sure of coincidence completely and firmly, Please kindly check or tight up bolts periodically in case of being loose.
6. Maintenance
(1) Lubricate slide valve periodically with lubricant.
(2) The slide valve may be removed for cleaning or inspection by simply unscrewing counter clockwise.
(3) Clean exterior of toilet with a mild, non-abrasive bathroom cleaner .
(4) Check the accessories periodically, one year warranty for free quality problem parts replacement. You can buy parts and change them by yourself under circumstance of not proper use.
You can contact our company or contact local agent directly.
7.Storage
This product can be used in any season including winter, if you need to store our portable toielt over the winter season:
(1) Empty the top tank and waste holding tank.
(2) Make sure all water is drained from the bellows pump by depressing pump several times after no water enters the bowl.
(3) Stored in shady environment, avoid strong sunlight and high temperature.
Note:
A small amount of water may remain in the top tank but will be harmless during winter storage.

Application
any where there is a vocer like tent or car

Remarks
GLORY WINNER INTL LIMITD HEADQUOTER: Rm. 1407, China Resources Building, 26 Harbour Rd., Wanchai Hong Kong SHANGHAI OFFICE: FRONT 1ST FL.,NO.12 south,929 LONG EAST YUHANG ROAD, SHANGHAI 200082,P.R.CHINA.